|
|
|
 |
Charging information on eLite 250
Completely read and understand the
following
information about your batteries before operating
your scooter. The information
on this PDF is the correct
way to connect the batteries to the scooter. Please follow
the instructions to prevent any damage to your batteries. Download
PDF here.
ATTENTION
CUSTOMERS PLEASE NOTE: |
THANK YOU FOR PURCHASING A
BLADEZ PRODUCT. THE FOLLOWING INSTRUCTION ARE TO
INFORM YOU OF THE CHARGING INSTRUCTION.
• LIGHT ON CHARGER WILL BLINK TO NOTIFY THE SCOOTER IS CHARGING NORMALLY.
• PLEASE FOLLOW THE CHART.
ESTIMATED CHARGING TIME
|
LIGHT SIGNAL |
0 – 40
MIN. |
BLINK RED 6 TIMES CONTINUOUSLY |
40 MIN. – 6
HOURS |
BLINK AMBER 6 TIMES CONTINUOUSLY |
6 HOURS AN ABOVE |
BLINK GREEN 6 TIMES CONTINUOUSLY UNTIL CHARGER
IS UNPLUGGED |
NOTE: PLEASE USE THIS INFORMATION
TO REPLACE THE CHARGING INFORMATION ON PAGES 10-11
IN YOUR OWNER’S MANUAL. |
XTR-S
The Brakes on the XTR-S should come fully adjusted from the
factory. However, it may be necessary to adjust the brake
from time to time. Click
here to download pdf or read below.
 To adjust the brakes:
1. Loosen the tension screw on the Brake Lever by rotating
it counter-clockwise until the wheel spins freely, with some
For further adjustment:
2. With one hand, depress the brake calliper using your thumb
and forefinger. (Fig. 9)
3. With the other hand, adjust the tension screw on the brake
line.
a. Turn the tension screw clockwise to loosen the brake.
b. Turn the tension screw counter-clockwise to tighten the
brake.
Squeaky Brakes
The brakes may squeak before they are broken in. This is
normal and will not affect the function or performance of
the brakes. With continued use, the squeak should go away.
|
|
